Sample System Component

iversal Analyzers Inc, USA

Universal Analyzers produces gas sample extraction, transport and conditioning systems for CEM (Continuous Emissions Monitoring) and process measurement.

As part of the AMETEK Thermal Process Management business unit which includes O'Brien we can now coordinate the interface between the sample probe, the heated sample line, the sample gas cooler and the balance of conditioning components so that all required connections are provided in a single package.

We can simplify your emissions and process gas sample measurements from the extraction point to the analyzer.


  • Gas Sample Probes
  • Gas Coolers
  • Sample Systems
  • Accessories

Distillation Sampler Model

The Universal Analyzers Model 1221 Distillation Sample Probe is a unique self-cleaning and temperature stabilized primary sample conditioning system for demanding on-line gas analysis applications.

It is designed to solve the key issues that compromise plant performance by improving measurement accuracy and reliability. The 316SS self-cleaning separator is designed to condense and wash the heavy components in the sample back into the process along with any deposited solids avoiding the regular ‘plugging’ that occurs with conventional conditioning systems. Maintenance of the Model 1221 Distillation Sample Probe is further simplified as once isolated from the main-line, the separator can be simply removed without the need to remove the entire probe.

ASAP Netherland

ASaP is the expert for comprehensive analytical solutions for high performance, high quality process analysis.
To supply practical solutions for your analytical needs

This applies to on-line process analyses as well as laboratory and experimental analyses.

The analyzer products and sample conditioning components and systems are particularly suitable for gas and liquefied samples.


  • System design
  • System production
  • Commissioning and start-up
  • FAT, SAT and other tests
  • (Preventive) maintenance
  • (On-site) troubleshooting
  • (ISO-17023) validation
  • Calibration
  • Offshore service
  • Service contracts
  • Analyzer rental


  • BTU analyzers
  • Gas chromatographs
  • Hydrocarbon Dewpoint analyzers
  • Hydrogen analyzers
  • Infrared photometers
  • Mass spectrometers
  • Moisture analyzers
  • Oxygen analyzers
  • Portable analyzers
  • Sulfur analyzers
  • Ultraviolet analyzers

LNG Probe

ASaP introduces their revolutionary LNG probe-vaporizer

The Phazer conforms to ISO 8943 and is tested against EN 12838. Your LNG measurement is only as accurate as your provided sample.  The Phazer is the only cryogenic LNG probe-vaporizer that provides verifiably accurate and representative LNG samples at 0,9 barg.


For over 50 years, O'Brien has been supplying the petrochemical, refining, pulp & paper, and power industries with quality products based on the application of our heat transfer expertise.

Our recommendations and products reflect our knowledge of industry practices, regulations, and code requirements so you are assured of a complete solution for your specific application. It is our attention to detail makes it easy for you to confidently select a package for your most common applications or create one-of-a-kind solutions for technically complex requirements from our standard components.

TRACEPAK® and STACKPAK™ instrument impulse connection tubing bundles as well as process and emissions analyzer sample transport bundles incorporate industry leading innovations such as TrueTube® sample transport tubing and SensorTube® temperature control. Eliminating analyzer response delays that were routine and accepted and simplifying trouble prone installation of temperature control solutions.

VIPAK®, HEATPAK® and FLEXPAK® instrument enclosures provide winterizing and temperature maintenance for field mounted process instruments, manifolds and fittings. VIPAK is an overall enclosure available in three configurations and fifty sizes. Rigid ABS and fiberglass outer shells with molded in place polyurethane insulation protect instrumentation in ambient conditions as low as -70°F/-60°C. HEATPAK and FLEXPAK options protect only the process wetted portion of the transmitter and manifold.

SADDLEPAK® is a modular support system for field mounted instruments. Solutions are available from traditional floor mounting to tensioned cable mounts that close couple instruments to process piping. The 9-mil zinc coating is three times thicker than hot dip galvanizing and provides superior corrosion protection.

O'Brien MJ® polymer coated tubing and STRUT-RAK™ alternative to cable tray are designed for the demanding requirements of offshore applications where space and weight savings are as important as the corrosion resistance of small-bore tubing systems.

O'Brien SERVICESSM provides factory installation and design review for all industry applications.

O’Brien TAW05589 MJ Jacketed Tubing
O’Brien MJ jacketed tubing is proven to prevent external corrosion from salt air, windblown saline sand, contact with dissimilar metals and construction or maintenance debris such as weld slag and grit blast overspray.* It is produced in long continuous coils that eliminate the need for unions and the potential leak points every six meters. Continuous lengths of corrosion protected tubing are installed faster and with higher reliability than conventional sick and fittings. Necessary fittings can be located at easily accessible points instead of hidden in elevated tray or under walkways. Purpose built payout stands and straighteners make the handling, straightening and installation of MJ jacketed tubing similar to that of electric cable. Individually protected O’Brien MJ jacketed tubing can be grouped into bundles so that up to four tubes are installed in about the same time as a single run, and much faster than traditional stick and fitting construction. Tubes are arranged in a parallel or flat configuration keeping the bending radius to a minimum and taking less space in the tray. Seals extend protection over the fittings and end connections so the entire installation is shielded from all sources of external corrosion.

Tested and Proven
The tough proprietary O’Brien TAW05589 MJ jacketed tubing has withstood:

  • 1000 hours exposure to acidified salt air, humidity and spray.
  • hot weld slag without penetrating the corrosion resistant coating.
  • abrasion from grit blasting and high pressure water without penetrating the corrosion resistant coating.
  • constant vibration for over 7000 hours without damage to the corrosion resistant coating from cable trays or support clips

Check out O'brien products at O'Brien | Trusted Thermal Processing Equipment Supplier (

Training List

  • in Process Analyzer Training

    Advanced Process Analyzer Training 2024 – KL, Malaysia

    Advanced Process Analyzer Training 2024 Instructor:  Steve Smith, Smith Analytical LLC, USA. Date:  October 21 to 25, 2024 Venue:  Kuala Lumpur, Malaysia Key Fundamental Subjects: Analyzer Chemistry & Sample System Analyzer Key Fundamental Technologies Gas Chromatography System Gas Chromatography Simulation Lab Download the training brochure he...

List of Events

  • in Event

    OTC Asia 2024 – Hoffer Flow Controls, USA

    For the first time ever, Hoffer Flow Controls and IPSA will participate in the OTC Asia that will be held at Kuala Lumpur Convention Centre from 27 February 2024 to March 1st , 2024.  Hoffer specialized in the customized turbine flowmeter for subsea application and flow metering solutions.  Please visit us at B511, Hall 5....
  • in Event

    Welcome to IPSA LabAsia 2023

    IPSA, the premier sales & services provider for process & laboratory analytical instrumentation and measurement will be exhibiting ta LabAsia 2023. Come and visit us at booth no. C64 for exciting products from Tannas, Gasmet, Biolab and Debye. See you there!...

Product Updates

  • in Product Updates

    Determination of H2S in Liquids and Gases by ECH

    The ECH  Sulfimax GX Lab fulfils the requirement of German standard DIN 38405-27: Determination of sulphide by gas extraction method (D 27) Applications: – Water, drinking water, surface water – Municipal wastewater – Industrial wastewater – Monitoring of landfill-leachate – Gas analysis (e. g. LNG, LPG) – H2S in...
  • in Product Updates

    Tannas & King Distributor Portal_CEC L-40 Announcement

    We have terrific news to share! After nearly three years of industry meetings and round-robin testing work, the Tannas Noack S2® has been officially accepted into the CEC L-40 Noack test standard. We have already been notified by the Chairman of the CEC L-40 working group from France of their upcoming purchase! Please notify those...
  • in Product Updates

    Hoffer Flow Meter Calibration Lab | ISO 17025 & Z540 Accredited

    HOFFER CALIBRATION SERVICES ISO 17025 AND Z540-1 ACCREDITED With 50 years of flow meter experience Hoffer Flow Controls is regarded as a world leader in flow technology. Our flow meter calibration lab is ISO 17025 accredited and we offer flow meter calibration services for pulse producing flow meters on liquids up to 1,525 GPM. Flow...

New Products

  • in New Products

    Smith Analytical Adsorption Filter

    The Model 7 Adsorption Filter is a US patent pending design to trap solid particles found in a vapor stream. The Model 7 Filter is available in both a non-bypass and by-pass version. The Model 7 Filter works by directing the vapor stream through a series of chambers while changing the flow profile from laminar...
  • in New Products

    Barben Analytical USA manufacturers of pH-ORP and Oxygen Analyzer for Gas & Liquid Phase

    BARBEN ANALYTICAL Barben Analytical is a market leading analytical supplier that designs, manufactures and sells analytical measurement products for the process industries.  Our core products consist of pH and ORP electrochemical sensors along with gas and liquid phase optical oxygen analyzers. These products help our customers achieve higher level...
  • in New Products

    Oil Condition Inline Analyser by Spectrolytic UK

    The FluidInspectIR®  – Inline is a plug & play inline analyser for the real-time, in-situ monitoring of oil and lubricant condition. The FluidInspectIR®  – Inline is the system of choice for monitoring and protecting valuable plant assets in power generation such as engines, turbines and transformers, in metal-working plants like steel and alum...

Instrumentation & Petroleum Services Asia Sdn Bhd
#03A-02, 8trium Tower 1, Jalan Cempaka SD 12/5, Bandar Sri Damansara,
52200 Kuala Lumpur, Malaysia

Tel : +603-6279 9980 | Fax : +603-6279 9970
Email : | Monday - Friday 08.30 - 17.30